Page 453 - Demo

423ACTUAL SIZEwww.southco.com/F6B Maximum radius for any portion of door geometry to clear hinge and hardware D Maximum for straight edged door as shownC Minimum gap for 1.5 (.06) thick straight edged door as shownA24.2 (.95)0.5 (0.02) ClearanceDimensions in millimeters (inch) unless otherwise statedNotesMounting:* Select the frame leaf with a value of E best suited to the configuration of your door. The dimension E+ 0.6 (.02) = the distance from the outside surface of your frame to the inside surface of your door.Series Panel Preparations DimensionsA B C D1 17.6 (.69) 10.9 (.43) 3.2 (.13) 132º2 20.6 (.81) 12.7 (.50) 3.9 (.15) 125º3 24 (.95) 15.3 (.60) 4.4 (.17) 118ºØ 5.5±0.1(.217±.004)Holes for mountinghardware locationon frameØ 5.5±0.1 (.217±.004)Holes for mounting hardware location on doorDoorFrame48±0.2(1.889±.008)28.7±0.1(1.130±.004)9.7±0.1(.382±.004)116 ±0.2(4.567±.008)34±0.2(1.339±.008)AxialRadialHinges may be fastened to door and frame by:- M5 (No. 10) hardware. Machine screws are recommended for mounting frame leaf.- *Hex jam nuts. Verify clearance with door edge. Depending on jam nut orientation, full rotation may be obstructed.- Welding.DoorFrameAdditional Mounting Options